Yealink CP Series Setup Guide

How to provision Yealink CP conference phones to make calls with Telzio.

This guide pertains to the Yealink CP IP conference phone series. With Telzio's unlimited users, you can create a dedicated user to configure with each of your conference phones.

If your device was previously used with a different provider, you'll first want to do a factory reset on the phone.

Log into the phone's web interface

  1. Tap OK to obtain the IP address of the phone
  2. Type the phone's IP address into your web browser
  3. Login with the following default username and password:
    • Username: admin
    • Password: admin

Enter the user credentials

After you log in, you will see the phone's status page.

  1. From the green top menu, select Account
  2. Enter the following settings:
    • Line Active: Enabled
    • Label: Enter the name you want displayed on the phone
    • Display Name: Your Name
    • Register Name: Your Username (all lowercase)
    • User Name: Your Username (all lowercase)
    • Password: Your Password (case sensitive)
    • Server Host: sip.telzio.com
  3. Press Confirm
  4. The phone is now ready to make and receive calls
To connect the phone via Wi-Fi, you can deploy the WF50 Wifi USB Dongle.